- 5 -
2 Care and maintenance
2.1 Maintenance
The equipment should be cleaned at regular intervals to ensure trouble-free operation.
It requires only normal cleaning (sponge, damp cloth, mild detergent). Do not use
chemical additives.
You should, however, make sure that the bores of the nuts for the brush spindle stay
clean. Be especially careful when polishing with pumice.
When undoing the nuts, remember that the
left side has a right-handed thread
and
the
right side a left-handed thread
.
2.2 Care
!
i
Always disconnect the power cable before undertaking
cleaning or maintenance.
The model plate must always be legible and should not be
removed.
Remove external dirt from time to time with some form of cold
cleaner.
Use only cold cleaners to avoid damaging the paintwork or
removing the lettering.
Recommended: A151 universal cleaner.
Summary of Contents for 155999
