- 8 -
7 Troubleshooting / Correcting errors
Fault
Likely cause
Likely solution
Ball bearing noise
Faulty bearings
Change bearings
Spindles slip
Spindles too
loose
Tap spindles lightly with a hammer
Spindles can be
undone
Spindles too tight
on taper
Contact Service
If the above recommendations do not solve the problem, contact your dental
depot or our Service department.
7.1 Technical data 155999
*Other Voltages upon enquiry.
Noise emission
≤
70 db(A).
We reserve the right to make technical changes.
Voltage*
220-240 V / 50/60 Hz
Power consumption
2.3 A
Output
500 W
Weight
13.5 kg
Overall width
460 mm incl. standard spindle
Depth
195 mm
Height
210 mm
i
i
Summary of Contents for 155999
