3 Safety Guidelines
Configuring and operating this equipment requires
precise knowledge
and
observance
of the instructions in this
user manual
. The equipment is designed only for its intended
application.
WARNING:
•
Servicing and repairs should be carried out only by authorised specialists.
•
Before you carry out any cleaning or maintenance work, disconnect the
power plug and prevent the motor from restarting accidentally. You should
also disconnect the water line.
•
Always wear protective goggles before working on the grinding disc.
•
Electric motors have dangerous, high-voltage rotating parts.
Incorrect usage or inadequate maintenance could endanger personnel
and equipment.
•
Any work on the motor should be carried out only by qualified service
personnel.
•
Allow the condensors time to discharge before opening the unit.
•
When working on the unit, wear close-fitting clothing and roll sleeves
inward only. Do not wear gloves.
•
Wear a hair net (or similar) if you have long hair.
•
Do not wear rings, chains, bangles or similar jewelry when working with
the
HSS-ZA
.
•
Turn off the tap overnight and at weekends.
•
Never
switch from level “II” (high speed) directly to level “I” (low speed).
Always select setting “0” (wait for disc to stop) before making the speed
change.
•
Make sure that the equipment is connected to the correct power source.
5
