8.3.5
Setting the Temperature
13
1
8
6
4
5
7
1. Press and hold Temperature (6),
then press Start/Stop (7) once.
The first character on the display
(8) flashes to indicate that the
value can be changed by pressing
Set-Point (4) or True Value (5)
while Temperature (6) is held on.
Release all three buttons to store
the changed value.
2. The value is stored by
simultaneously pressing
Polymerisation (1) and Set-Point
(4).
3. For the second value, press and
hold Temperature (6), then press
Start/Stop (7) once. The second
character on the display flashes.
Follow the same sequence as
above.
4. The procedure is the same for the
third display character. Each
change needs to be stored.
5. If Temperature (6) is pressed and
held, and Start/Stop (7) pressed a
fourth time, the first of the three
individual temperatures is
displayed.
Summary of Contents for WAPO-Ex
