∙ Solar Fountain Size
: 6.3 x 1.6 inches (16 x 4cm)
∙ Power
: 1.4 W
∙ LifeTime
: Over 10,000 hours
∙ Water Height
: 11.8 - 19.7 inches (30 - 50cm)
∙ Max. Water Flow Rate
: 35.2gallons/hours (150L/hours)
1. After unboxing the package, assemble the spray head connector with the solar water fountain pump
outlet.
2. Attach the spray head onto the spray head connector.
3. Immerse the entire solar water fountain into the water and make sure that it is completely immersed in
water.
4. Let the solar panel of the fountain be exposed to sunlight without any shade so that the solar water
fountain can start spraying water.
Installation
1. Before using the solar water fountain, the protective film on the solar panel should be removed to
avoid affecting its normal operation.
2. Make sure to allow the solar panels to be exposed to sunlight regularly. The pump may not work under
shadow or cloud. Because the power of the solar water fountain depends on sunlight, the pump is
influenced by the weather, seasons, etc.
3. The pool or fountain should have enough water to ensure the complete immersion of the solar water
fountain in water.
4. Clean the solar water fountain and its solar panel regularly. Make sure that nothing covers any part of
the solar panel or blocks the pump.
5. If you find that the water spray is blocked, you can remove the pump for cleaning. (As shown in the
picture)
Important Notes
Specification
2.
4.
3.
1.
Need help? Send us an email at: contact@wasserstein-home.com
Page 2 - 2
Made in China
For more information and inquiries,
please reach out to:
contact@wasserstein-home.com
Dartwood and Wasserstein are trademarks
of Dropcases Ltd.
