E. Warning and Notification
1.
If there is a water leakage, a notifi-
cation on your phone will be dis-
played.
2.
The water sensor will also emit a
beeping sound and the red light
indicator will turn on.
3.
Monitor the battery level directly
from the app, to ensure the water
sensor will never run out of power.
F. Q&A
1. Problems connecting the device with our App.
Try resetting your device by following the instructions in Section C. If
problem persists, please try connecting the device using AP mode:
•
Press the power button inside your water sensor for 5
-
10 seconds, to
ensure that your indicator light is flashing quickly.
•
Press the power button for another 5
-
10 seconds until the light flash-
es slowly now.
•
Press
“
Add Device
”
in the Wstein App.
•
Click
“
AP Mode
”
in the top right hand corner.
•
Select your home
’
s Wi
-
Fi network & enter your Wi
-
Fi Password.
•
Go to your Wi
-
Fi setting and connect to
“
SmartLife_XXXX
” .
•
Go back to the App and finish the final connection.
2. If there are no notification with water leakage
•
Go to Profile > Settings > make sure push notification is turned on.
•
Go to your mobile setting, make sure notification is allowed for
Wstein App
G. General Specifications
Wireless coverage
：
45m
Battery specification
：
CR2
-
3V x 1
Standby current
：
13
μ
A
Working current
：
65mA
Working temperature
：
0°C
～
40°C
Operating humidity:
：
20%
～
85%
Wi
-
Fi standard
：
IEEE801.11b/g/n
Wireless type
：
Wi
-
Fi 2.4 GHz
For more information:
www.wasserstein
-
home.com
Please contact us at:
contact@wasserstein
-
home.com
