![background image](http://html2.mh-extra.com/html/wassp/wmb-3250/wmb-3250_installation-manual_3494803021.webp)
Doc. P/N: WSP-009-005
Version: V1.5
Issue Date: October 2013
www.wassp.com
Page 21 of 73
Installation Manual
6.2.3 Power to BTxR
24 V DC power is input to the BTxR from the vessel’s power supply through the connector on
the BTxR’s faceplate end cover marked
24 V
.
The power input uses a Switchcraft-EN3 2-way connector to connect to the faceplate end cover.
See below for connection details.
Figure 15. Cable Clamp dimensions
H1
H2
l
L
B
34-46
45-57
60 90 60
Red or Clear
Black
1
2
2-way Cable Connector
24 V DC Input
1
2
+ ve
-ve
Figure 14. BTxR 24 V DC Input Connector Pin out Diagram
Pin No.
Colour
1 (+)
RED or CLEAR
2 (-)
BLACK