![background image](http://html2.mh-extra.com/html/wassp/wmb-3250/wmb-3250_installation-manual_3494803024.webp)
Doc. P/N:
WSP-009-005
Version: V1.5
Issue Date:
October 2013
www.wassp.com
Page 24 of 73
Installation Manual
7.3 Software Installation
Your WASSP Processor comes preloaded with the WASSP Application Software.
►
WASSP GUI
Used for user interaction and Control
►
Processing Module
Used for Signal Processing
►
Transfer Task
Used for serial data control. See “8. Sensors” on page 27
►
Navigator
Optional Chart Overlay Viewer
►
Diagnostics
Used by Technician. The Diagnostics Task may be started
separately. See section: “15. APPENDIX B - Remote Diagnostics
Utilities” on page 68
SENSORS
RS 232
ETHERNE
T 1-
(ONBO
ARD
)
ETHERNE
T 2 -
(C
ARD
)
BTxR
TRANSDUCER
3RD PARTY
HYDRO-
GRAPHIC
SOFTWARE
TRANSFER
TASK
GUI
WASSP PC
DIAGNOSTICS
TOOLS
NAVIGATOR
PROCESSING
MODULE
7.3.1 User Dongle
To run the system, you must connect the supplied WASSP user dongle. If you do not have a
dongle attached to the system you will not be able to run the WASSP program with BTxR input
or GPS input. The software prompts you that a dongle is not connected and Start/Stop button
status is ‘DEMO’.
If operating without a dongle you can play recorded WASSP data files and view the four
displays. The
TX Mode
button has the text
DEMO
to show that you cannot operate the
transducer or BTxR.
If you attach a dongle after running the WASSP software program, select
Rescan Dongle
or
restart the WASSP program or press the Transmit button.
For a complete description of the WASSP Multibeam Sonar System program functions, refer to
the
WMB-3250 Operator Manual
.
Figure 19. Basic Layout of Software Components