![background image](http://html2.mh-extra.com/html/wassp/wmb-3250/wmb-3250_installation-manual_3494803035.webp)
Doc. P/N: WSP-009-005
Version: V1.5
Issue Date: October 2013
www.wassp.com
Page 35 of 73
Installation Manual
9
The HYPACK
®
system talks on an ethernet network to the WASSP system. The WASSP
software always uses the port 18007. The Internet Address should be the address of the 2nd
ethernet network on the WASSP Processor, used for the HYPACK
®
connection. This should be
a hard coded IP address rather than using DHCP or DNS server. Enter the relevant values into
the ethernet network Connection Settings spaces provided.
Figure 27. HYSWEEP Network Setup
10
Next setup the Offsets for the Sonar Head and any other device parameters. The GPS offsets
for HYSWEEP will be added under the HYPACK
®
Navigation device. If the WASSP system is
running you can test the Network connection is receiving data but it is easier to test by running
up the data collection process.
Figure 28. HYSWEEP Device Offsets