Doc. P/N:
WSP-009-004
Version:
V1.3
Issue Date:
August 2013
Page 24 of 62
Operator Manual
4.8.5 Sensor Values Tab
The
Sensor Values
tab provides a selection of motion compensation options and corrections
for sensor misalignment. These settings should not be changed by the operator outside of the
commissioning process.
Figure 19. Ship Setup Options – Sensor Values Tab
The values under Current Values are the selected live motion readings from the NMEA sensors
that the WASSP system is connected to and reading from (with offsets applied).
,IUROOFRUUHFWLRQLVHQDEOHGDQGFRQ¿JXUHGFRUUHFWO\DQGWKHYHVVHOLVUROOLQJOHVVWKDQWKH
VRQDUSLFWXUHVKRXOGUHPDLQRQDOPRVWWKHVDPHDQJOHIURPSLQJWRSLQJRQÀDWLVKJURXQG
If the sonar picture rocks as the vessel rolls then the roll compensation setting is likely to be
wrong or the motion sensor is not being read by the WASSP system. Refer to Installation
Manual “10.2.8 Sea Trial - Commissioning Step 15 : Pitch and Heading (Optional)” on page
57.