8
CLEANING AND MAINTENANCE
The motor is permanently lubricated for life. DO NOT ATTEMPT TO LUBRICATE YOUR DISPOSER!
The disposer is self cleaning and scours itself with each use.
Your disposer is equipped with a removable **splash guard for ease of cleaning or replacement. Remove splash guard by pulling it out
from the top. To replace, simply insert into sink flange and push down until properly seated.
NEVER
put lye or chemical drain cleaners into the disposer, as they cause serious corrosion of metal parts. If used, resulting damage can
be easily detected and all warranties are void.
Mineral deposits from your water can form on the stainless steel turntable of your disposer, giving the appearance of rust.
DO NOT BE
ALARMED
, the stainless steel turntables used on PM2S2, PM2L7, PM2A, PM3, PM4, and Batch Feed models will not corrode.
TYPICAL INSTALLATIONS
560C396P01 REV B
SINGLE BOWL
DOUBLE BOWL
CENTER OUTLET
DOUBLE BOWL
END OUTLET
* Approx.
* Approx.
* Approx.
*
229 for models PM2S1
and PM2S2
*
254 for models PM2L2,
PM2A, PM3 and PM4
*
305 for batch feed
models PM2BF, PM2ABF
and PM3BF.
Choice of trap is optional.
BATCH FEED MODELS
CONTINUOUS FEED MODELS
NOTE:
All dimensions
are in mm.
* Add 16mm for
RFI filter.
** Batch Feed
does not use
splash guard.
