background image

INFORMATION PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK OR INJURY. SAVE THESE INSTRUCTIONS.

1.

To reduce the risk of injury by materials that may be 
expelled by a waste disposer, do not put the following 
into a disposer:

• clam or oyster shells

• drain cleaner 

• glass, china, plastic

• large whole bones

• metal, such as bottle caps, tin cans or aluminum foil

• whole corn husks.

2.

When not operating the disposer, leave the stopper in place 
to reduce the risk of objects falling into the disposer.

3. For proper grounding instructions see the 

ELECTRICAL CONNECTION portion of this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

- When using electrical appliances, basic precautions should always be followed, including the following:

CLEANING & MAINTENANCE

DO NOT ATTEMPT TO LUBRICATE YOUR DISPOSER!

The motor is permanently lubricated.

The disposer is self cleaning and scours its internal parts
with each use.

NEVER 

put lye or chemical drain cleaners into the disposer,

as they cause serious corrosion of metal parts.

If used, resulting damage can be easily detected and all
warranties are void. Mineral deposits from your water
can form on the stainless steel turntable, giving the
appearance of rust.

DO NOT BE ALARMED

, the stainless steel turntables

used will not corrode.

SOME TYPICAL INSTALLATIONS

SINGLE BOWL

DOUBLE BOWL 

CENTER OUTLET

DOUBLE BOWL 

END OUTLET

10”

10”

10”

WLC-100

DIMENSIONS

Direct replacement for most
makes & models.

1

1

/

2

7 ”

8

5

/

8

5

9

/

16

16

1

/

2

4

1

/

2

Summary of Contents for WLC-100









Reviews: