8
The Pup Station should be located in an open, unobstructed, grassy
area to ensure accurate measurement of wind, rainfall and sunlight. The
station can be mounted to any post that can accommodate the
1.5" (4cm) U-bolt. Unless you are using the mounting tripod (item #
3396TPS), the post should be firmly anchored in the ground.
Connect the U-bolts to the inner side of the bracket. Place the bracket
over the top of the post. Attach the Pup Station to the post with the nuts
(fig. 1). Do not tighten the U-bolt nuts until you have oriented the station
(fig. 2).
Pup Station Installation
Fig. 1. Attaching U-bolt
Fig. 2 Station attached to
tripod
