5.2 Configuring the Keyfob
On the hub screen, select a keyfob from the peripheral list, and then tap to configure the
parameters of the keyfob.
Table 5-2 Keyfob parameter description
Parameter
Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap Save to save configuration.
Area
●
View the existing area.
●
Add the area that you want to arm, and then tap Save to
save configuration.
Temporary Deactivate
●
Tap Enable , and then the keyfob will send alarm messages
to the hubEnable is set by default.
●
Tap Only Disable Tamper Alarm, and then the system will
only ignore tamper alarm messages.
●
Tap Disable, and then the keyfob will not send alarm
messages to the hub.
LED Indicator
LED Indicator is enabled by default on the app. You also need
to press any button on the keyfob to enable the function.
●
If LED Indicator is disabled, the LED indicator will remain
off regardless of whether the keyfob is functioning
normally or not.
●
The function is only available when the version of the
DMSS app is 1.96 or later, the hub is V1.001.0000000.4.R.
211014 or later, and the keyfob is V1.000.0000001.0.R.
20210818 or later.
Control Permissions
Select the area over which the keyfob has control permissions.
SOS Alarm
If enabled, the SOS alarm messages will be pushed when an
alarm event is detected.
Siren Linkage
When an alarm is triggered, the accessories will report the
alarm events to the hub and alert with siren.
Alarm-video Linkage
When an alarm is triggered, the accessories will report the
alarm events to the hub and then will be linked with videos.
Video Channel
Select the video channel as needed.
Cloud Update
Update online.
If the latest version is detected, you need to tap Update on
the app, and then press any button on the keyfob to update
the keyfob.
User’s Manual
8
