10
WatchGuard AP300
Hardware Specifications
T-rail Mounting
To mount your WatchGuard AP300 device on a suspended ceiling, you can use one of the two T-rail
connectors included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). Before you mount
your WatchGuard AP device, make sure you select the correct T-rail connector size.
If you require additional space between the device and the ceiling, you can use the provided spacers and long
6x25 screws.
To mount the device on a suspended ceiling with the T-rail connectors:
1. Attach the T-rail connectors to the bottom of the WatchGuard AP device with the short 6x10 screws.
2. Press the device into the ceiling T-rail until the clips snap securely into place.
To protect your device from theft, use the Kensington security slot to attach a cable lock (not
included).
