Hardware Guide
7
Hardware Specifications
8 port 1G SFP Interface Module
The eight SFP interfaces are numbered from 0 to 7. To use these interfaces you must plug in a compatible SFP
transceiver.
Each SFP interface has two indicators. Indicators are located in the center of the interface module, between
the upper and lower row of interfaces. Indicators that point up (
▲
) show the status of the upper interface.
Indicators that point down (
▼
) show the status of the lower interface.
For each interface, the left indicator shows activity, and the right indicator shows the link status..
You can purchase compatible SFP transceivers from an authorized WatchGuard reseller:
SFP multi-mode transceivers (1000Base-SX, 850nm)
FINISAR FTLF8519P3BNL
WatchGuard SKU WG8585
Indicator
Indicator color
Interface Status
Activity (left)
Orange, blinks
Power on, network activity
Not lit
Power off, no connections
Connection (right)
Orange
Link at 1000 Mbps
Not lit
No link
1
0
Interface 0 Link
Interface 1 Link
Interface 1 Activity
Interface 0 Activity
