10
WatchGuard Firebox M4600
Hardware Specifications
Restore Factory-Default Settings
If you ever need to, you can restore your Firebox to its factory-default settings. For example, if you do not know
the administrator account passphrase or you want to start over with a new configuration, you can reset your
device. Make sure you back up your device configuration before you reset your device in case you want to
restore it in the future.
To reset your device:
1. Power off the device.
2. Press and hold the
Reset
button, while you briefly press the
Power
button on the front of the device
to power it on.
3. Continue to hold the
Reset
button while the
Arm
indicator is red.
4. Continue to hold the
Reset
button while the
Arm
indicator is slowly flashing green.
5. When the
Arm
indicator flashes green more rapidly, release the
Reset
button.
6. Wait until the
Arm
indicator starts flashing red.
7. Press and hold the
Power
button on the front of the device for five seconds to power off the device.
8. Briefly press the
Power
button on the front of the device to power it on.
