User Guide
113
Troubleshooting Tips
To disable WebBlocker, deselect
Enable WebBlocker.
How do I allow incoming services such as POP3, Telnet, and
Web (HTTP)?
1
With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Firewall
=>
Incoming
.
The Filter Incoming Traffic page appears.
3
Locate the pre-configured service you wish to allow in and
select
Allow
from the drop list.
4
Enter the Trusted network IP address of the computer hosting
the service.
5
Click
Submit
.
How do I allow incoming IP, or uncommon TCP and UDP
protocols?
You need the IP address of the computer that is receiving the
incoming data and the IP protocol number that corresponds to the
specific incoming IP protocol. To allow an incoming IP protocol:
1
With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Firewall
=>
Custom Service
.
The Custom Service page appears.
3
Beneath the Protocol Settings fields, select
TCP Port
,
UDP Port
or
Protocol
from the drop list.
The Custom Service page refreshes.
4
Enter a name for the service.
Summary of Contents for Firebox SOHO 6.1
