User Guide
33
Configure Your External Network
Configure the SOHO 6 External Network for
static addressing
If you are assigned a static address, then you must transfer the
permanent address assignment from your computer to the
SOHO 6. Instead of communicating directly to your computer, the
ISP now communicates through the SOHO 6.
1
With your Web browser, go to the System Status page using the
trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Network
=>
External
.
The External Network Configuration page appears.
3
From the Configuration Mode drop list, select
Manual Configuration
.
The page refreshes.
Summary of Contents for Firebox SOHO 6.1
