Chapter 5: Administrative Options
56
WatchGuard Firebox SOHO 6.1
Update Your Firmware
As new firmware is released, you should update the version
running on your SOHO 6. New updates are located on the
WatchGuard Web site at:
http://support.watchguard.com/sohoresources/
Download the new firmware file from the Web site and save it to a
known location on your management station.
Once you have downloaded the firmware, follow these steps to
update the version running on your SOH O 6:
1
With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Administration
=>
Update
.
The Update page appears.
N
OTE
If you are managing your SOHO 6 from a computer running an operating
system other than Windows (such as a Macintosh or Linux OS), you
must
update your firmware from this configuration page as firmware versions
are released. This is because WatchGuard installation applications are
only built for Windows platforms.
3
Read through the End-User License Agreement, then select the
I accept the above license agreement
checkbox at the bottom
of the page.
Summary of Contents for Firebox SOHO 6.1
