CHAPTER 2: Preparation, Installation, and Connection
22
MUVPN Client
21 From the Virtual Adapter drop list, verify that
Disabled
has been
selected.
22 From the Network Security Policy expand
Security Policy
, then
expand
Key Exchange (Phase 2)
.
My Identity and Security Policy should appear below New Connection.
23 Select
Proposal 1
.
My Identity and Security Policy should appear below New Connection.
24 Verify that the
Encapsulation Protocol (ESP)
check box is enabled.
25 Set the Encrypt Alg and Hash Alg drop lists to the same values
configured on the SOHO 6.
The “Hash Alg” setting refers to the “Authentication Algorithm” and the
“Encrypt Alg” setting refers to the “Encryption Algorithm” settings on the SOHO
6. In our example, Triple DES and MD5.
N
OTE
These two setting
must
exactly match those on the SOHO 6 or the
connection will fail.
