SOHO 6 Wireless Installation Procedures: Windows XP with Internet Explorer 5.x & 6.0
5
Configure the External Network of the SOHO 6 Wireless
5
If you connect to the Internet using a DSL or cable modem, restore the power to this device. The
indicator lights flash and then stop. The modem is ready for use.
6
Attach the AC adapter to the SOHO 6 Wireless and then connect it to a power source.
7
Restart your computer.
Configure the External Network of the SOHO 6 Wireless
Follow the instructions below to begin configuring the external network of your SOHO 6 Wireless and
then proceed to the specific, IP address assignment method utilized by your system: DHCP client,
Manual Configuration (static addressing), or PPPoE client.
Contact your ISP to determine which method they use to assign your IP address.
1
With your Web browser, go to the System Status page using the Trusted IP address of the SOHO 6
Wireless.
For example, go to: http://192.168.111.1.
2
From the navigation bar on the left side, select
Network
=>
External
.
3
Proceed to the following configuration instructions as appropriate to your system.
