User Guide
167
Troubleshooting Tips
12 Click to select the
Encapsulation
(
ESP)
checkbox and then
select a value for the
Encrypt Alg
and
Hash Alg
drop lists.
13 Select
DES
from the
Encrypt Alg
drop list and select
MD5
from the
Hash Alg
drop list.
14 Select
Tunnel
from the
Encapsulation
drop list.
This is the default setting.
15 Verify that the
Authentication Protocol (AH)
checkbox is
not
selected.
16 Once you have finished, select
File
=>
Save
or click the
button.
Troubleshooting Tips
WatchGuard maintains a knowledge base on our Web site,
including an In-Depth FAQ section on configuring and using the
MUVPN client. This is available at:
A few of the most common issues found in installing, configuring,
and using the MUVPN client are described below.
My computer is hung up just after installing the
MUVPN client...
This is most likely due to either the ZoneAlarm personal firewall
application interfering with regular Local network traffic or it is
because the MUVPN client is active and is unsuccessfully
attempting to create VPN tunnels.
When the MUVPN client is not in use, ZoneAlarm should be
shutdown and the client deactivated.
Summary of Contents for Firebox SOHO 6 Wireless
