Configuring High Availability Active/Active in Vcontroller
High Availability Guide
11
available otherwise. After the initial HASync, all configuration changes
are automatically synced between appliances.
12
The secondary appliance restarts. Your system is now synced and
operating in High Availability Active/Active mode.
You can check HA status from the High Availability tab in the System
Configuration window.
Customizing Advanced HA System Parameters
You can customize a number of HA parameters using the
Advanced HA
Parameters
dialog box. At this level, you can configure the following:
•
Send the HA heartbeat to the secondary appliance’s HA2
management interface.
•
Change the HA group ID.
In addition, you can manually trigger a Failover or Restart event on the
Primary or Secondary appliance.
To change any of these settings, follow these steps:
1
After starting the WatchGuard Vcontroller, click the
System
Configuration
button.
2
When the System Configuration window appears, click the
High
Availability
tab.
3
Click to select the checkbox marked
Enable High Availability
and
Active/Active
.
