CHAPTER 3: Starting the Firebox Vclass Appliance Setup
46
Vcontroller 3.2
14 You have two options:
•
You can either log out by typing
exit
at the prompt, and then switch to
using the Vcontroller to complete the system configuration. This is
detailed in the next chapter.
•
You can continue using the console to configure this appliance.
If you want to proceed with CLI configuration, refer to the
WatchGuard
CLI User Guide
for guidance in the use of CLI administration commands.
To most efficiently use the CLI, you should familiarize yourself with the
Vcontroller and the overall processes involved in administering a security
appliance.
The
WatchGuard CLI User Guide
contains all of the command syntax and
explanations of every command and the related parameters. Note,
however, that the CLI syntax does not represent all of the administrative
controls incorporated in the Vcontroller GUI.
The
WatchGuard CLI User Guide
is stored on the WatchGuard CD or is
available for downloading from the WatchGuard Technologies Web site.
The CLI User Guide is ready for on-screen viewing or printing.
1install_guide.book Page 46 Friday, June 7, 2002 1:10 PM
