Watchguard Firebox V10 User Manual Download

Page: 19 / 477

Firebox Vclass User Guide

xix

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO

WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY

APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE

IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE

ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS

WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE

COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO

IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO

MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE,

BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF

DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH

ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

All other trademarks or trade names mentioned herein, if any, are the property of their

respective owners.

WatchGuard Technologies, Inc.
Firebox Vclass Software
End-User License Agreement

IMPORTANT - READ CAREFULLY BEFORE ACCESSING WATCHGUARD

SOFTWARE:

This Firebox Vclass Software End-User License Agreement (‘AGREEMENT’) is a legal

agreement between you (either an individual or a single entity) and WatchGuard

Technologies, Inc. (‘WATCHGUARD’) for the WATCHGUARD Firebox Vclass software

product, which includes computer software components (whether installed separately on

a computer workstation or on the WATCHGUARD hardware product or included on the

WATCHGUARD hardware product) and may include associated media, printed

materials, and on-line or electronic documentation, and any updates or modifications

thereto, including those received through the WatchGuard LiveSecurity Service (or its

equivalent), (the ‘SOFTWARE PRODUCT’). WATCHGUARD is willing to license the

SOFTWARE PRODUCT to you only on the condition that you accept all of the terms

contained in this Agreement. Please read this Agreement carefully. By installing or

using the SOFTWARE PRODUCT you agree to be bound by the terms of this

Agreement. If you do not agree to the terms of this AGREEMENT, WATCHGUARD

will not license the SOFTWARE PRODUCT to you, and you will not have any rights in

the SOFTWARE PRODUCT. In that case, promptly return the SOFTWARE PRODUCT,

along with proof of payment, to the authorized dealer from whom you obtained the

SOFTWARE PRODUCT for a full refund of the price you paid.

Ownership and License. The SOFTWARE PRODUCT is protected by copyright

laws and international copyright treaties, as well as other intellectual property laws and

treaties. This is a license agreement and NOT an agreement for sale. All title and

copyrights in and to the SOFTWARE PRODUCT (including but not limited to any

images, photographs, animations, video, audio, music, text, and applets incorporated

into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies

of the SOFTWARE PRODUCT are owned by WATCHGUARD or its licensors. Your

rights to use the SOFTWARE PRODUCT are as specified in this AGREEMENT, and

Summary of Contents for Firebox V10






























































































































































































































































































































































































































































































Search results

Summary of Contents for Firebox V10

Reviews:

Related manuals for Firebox V10

Brands by name

Popular brands

Watchguard Firebox V10, User Manual

Search results

Summary of Contents for Firebox V10

Reviews:

Related manuals for Firebox V10

Brands by name

Popular brands