manualshive.com logo in svg

Watchguard Firebox V10, User Manual

The WatchGuard Firebox V10 is a top-tier security appliance designed to protect your network. Ensure optimal performance and understand all its features with the comprehensive Hardware Manual. Download this detailed, user-friendly manual for free from 88.208.23.73:8080 to get the most out of your Firebox V10.

Share
Download
background image

CHAPTER 10: Using Proxies

258

Vcontroller

advertising users see. Check the URLs of popup windows or 
banner ads you or your users find on the Web for other ideas.

Windows EXE

A pattern match rule that denies URL path content 
with the extension “.exe.” This effectively prevents 
users from accessing common Windows 
applications using HTTP. Installable programs are 
often EXE files, so in some scenarios this rule can 
cause problems.

Windows DLL

A pattern match rule that denies URL path content 
with the extension “.dll.” This effectively prevents 
users from accessing some Windows applications 
across HTTP. DLLs are sometimes use for web 
applications such as banners or tickers. However, 
DLLs can pose a threat to your systems and 
network. Exercise caution when changing this rule.

N

OTE

Blocking *.exe files in URLs prevents Windows users on your 
network from downloading executables over HTTP. This 
might inconvenience users who need access to software 
downloads. In addition, blocking *.dll files in URLs prevents 
some web applications from working.

Summary of Contents for Firebox V10






























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Firebox V10

Honeywell Sucre Box + Quick Start Manual preview
Sucre Box +
Brand: Honeywell Pages: 2
H3C SecPath NS-HTIM-GMG2A Manual preview
SecPath NS-HTIM-GMG2A
Brand: H3C Pages: 17
ZyXEL Communications USG1100 Quick Start Manual preview
USG1100
Brand: ZyXEL Communications Pages: 8
Fortinet FortiDB 3000D Quick Start Manual preview
FortiDB 3000D
Brand: Fortinet Pages: 24
PaloAlto Networks TECHDOCS ION 9000 Hardware Reference Manual preview
TECHDOCS ION 9000
Brand: PaloAlto Networks Pages: 32
Fortinet FortiGate-60M Quick Start Manual preview
FortiGate-60M
Brand: Fortinet Pages: 2
Fortinet FortiGate-60 series Administration Manual preview
FortiGate-60 series
Brand: Fortinet Pages: 388
Dell NSA E8500 Getting Started Manual preview
NSA E8500
Brand: Dell Pages: 74
Dell SonicWALL NSA 6600 Getting Started Manual preview
SonicWALL NSA 6600
Brand: Dell Pages: 57
Dell SonicWALL Administration Manual preview
SonicWALL
Brand: Dell Pages: 49
Dell SonicWALL GX250 Manual preview
SonicWALL GX250
Brand: Dell Pages: 200
Nexcom NSA 7145 User Manual preview
NSA 7145
Brand: Nexcom Pages: 94
Radware DefensePro 6.02 User Manual preview
DefensePro 6.02
Brand: Radware Pages: 339
websense V10000 G2 Getting Started preview
V10000 G2
Brand: websense Pages: 52

Brands by name

Popular brands

Load more brands