CHAPTER 1: Hardware Descriptions
6
Vclass
lights labeled
10
and
100
. These LEDs indicate the
speed of traffic being transmitted.
High Availability Status LED
Indicates the current status of this appliance, if it is
one of two connected as a high-availability system.
If this is the primary appliance, and the light is on
and steady, the system is functional, and this
appliance is on-line. If this is the primary appliance
and the LED is blinking, a failover has occurred
and the secondary appliance is online.
High Availability Interfaces
Two Ethernet interfaces, labelled
HA2
and
HA1
enable you to connect with a cross-over Ethernet
cable to other High Availability-ready Firebox
Vclass appliances for failover (backup) protection.
Incorporated into the two high-availability
Ethernet ports are two indicator lights labeled
10
and
100
. These LEDs indicate the speed traffic is
transmitted.
Console Interface
A single RJ-45 interface, labeled
Console
, permits a
direct workstation-to-appliance connection. You
can use the WatchGuard Command Line Interface
(CLI) to configure and administer this appliance.
For more information about this administrative
option, see the
CLI Guide
.
Ready
Blinks when the appliance is powering up.
Illuminates when the appliance is ready for
network traffic.
Admin
Illuminates when a system administrator is
connected to the appliance by means of the
Vcontroller or the WatchGuard CLI.
