background image

Meeting System Requirements

2

WatchGuard Firebox System

Meeting System Requirements

Make sure you have the proper software, browser, and hardware for running the 
WatchGuard Firebox System version 4.6 or 4.6.1. 

Software requirements

WatchGuard Firebox System version 4.6 or 4.6.1 can run on Microsoft Windows 98, 
Windows NT 4.0, or Windows 2000 as specified below:

Windows 98 Requirements

  - Microsoft  Windows  98

Windows NT Requirements

 - Microsoft Windows NT 4.0 Service Pack 4, 5, or 6a

Windows 2000 Requirements

 - Microsoft Windows 2000 SR1

Web browser requirements

Make sure you have the proper software for running the installation from the CD and 
for viewing Online Help. Microsoft Internet Explorer® 5.01 or later is required to run 
the installation from the CD. The following HTML-based browsers are recommended 
to view WatchGuard Online Help:

• Netscape Communicator® 4.7 or later

• Microsoft Internet Explorer 5.01 or later

Hardware requirements

Make sure you have the proper hardware. Minimum hardware requirements are the 
same as for the operating system on which WatchGuard Firebox System 4.6 or 4.6.1 
runs. The recommended hardware ranges are listed below:

Hardware Feature

Minimum Requirement (for Management Station)

CPU

Pentium II

Memory

Same as for operating system.

Recommended:
64 MB for Windows 98

64 MB for Windows NT 4.0

64 MB for Windows 2000 Professional

256 MB for Windows 2000 Server

Hard disk space

25 MB to install all WatchGuard modules

15 MB minimum for log files

Additional space as required for log files

Additional space as required for multiple 

configuration files

CD-ROM drive

One CD-ROM drive to install WatchGuard from its 

CD-ROM distribution disk

Summary of Contents for Firebox X1000

















Reviews: