Watchguard Firebox X10E User Manual Download

Page: 191 / 314

Defining Firebox Users and Groups for Authentication

User Guide

169

To add a new group, click the

Add

button beneath the

Groups

list.

The Add Firebox Group dialog box appears.

Type the name of the group. Click

To add a new user, click the

Add

button beneath the

Users

list.

The Setup Firebox User dialog box appears, as shown in the

following figure.

Enter the username and password.

To add the user to a group, select the group name in the

Not Member Of

list. Click the left-pointing arrow to

move the name to the

Member Of

list.

Summary of Contents for Firebox X10E



























































































































































































































































































































Search results

Summary of Contents for Firebox X10E

Reviews:

Related manuals for Firebox X10E

Brands by name

Popular brands

Watchguard Firebox X10E, User Manual

Search results

Summary of Contents for Firebox X10E

Reviews:

Related manuals for Firebox X10E

Brands by name

Popular brands