Watchguard Firebox X10E User Manual Download

Page: 266 / 314

Chapter 14: Generating Reports of Network Activity

244

WatchGuard Firebox System

User

Filter a report based on authenticated username.

Creating a new report filter

Use Historical Reports to create a new report filter. Filters
are stored in the WatchGuard installation directory, in the
subdirectory

report-defs

with the file extension

.ftr

From Historical Reports:

Click

Filters

. Click

Add

Enter the name of the filter as it will appear in the

Filter

drop-down list in the

Report Properties Setup

tab.

This name should easily identify the filter.

Select the filter type.

An Include filter displays only those records meeting the criteria

set on the Host, Service and User tabs. An Exclude filter displays

all records except those meeting the criteria set on the Host,

Service, and User tabs.

Complete the

Filter

tabs according to your report

preferences.

For a description of each control, right-click it, and then click

What’s This?. You can also refer to the “Field Definitions”

chapter in the Reference Guide.

When you are finished modifying filter properties,
click

The name of the filter appears in the Filters list. The Filter

Name.ftr file is created in the report-defs directory.

Editing a report filter

At any time, you can modify the properties of an existing
filter. From the

Filters

dialog box in Historical Reports:

Highlight the filter to modify. Click

Edit

The Report Filter dialog box appears.

Modify filter properties according to your preferences.

For a description of each property, right-click it, and then click

What’s This?. You can also refer to the “Field Definitions”

chapter in the Reference Guide.

Summary of Contents for Firebox X10E



























































































































































































































































































































Search results

Summary of Contents for Firebox X10E

Reviews:

Related manuals for Firebox X10E

Brands by name

Popular brands

Watchguard Firebox X10E, User Manual

Search results

Summary of Contents for Firebox X10E

Reviews:

Related manuals for Firebox X10E

Brands by name

Popular brands