Watchguard Firebox X10E User Manual Download | Manualshive

Page: 8 / 314

background image

viii

WatchGuard Firebox System

PRODUCT for a full refund of the price you paid. The WATCHGUARD
hardware product is subject to a separate agreement and limited hardware
warranty included with the WATCHGUARD hardware product packaging
and/or in the associated user documentation.
1.

Ownership and License. The SOFTWARE PRODUCT is protected by

copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties.  This is a license agreement and NOT
an agreement for sale.  All title and copyrights in and to the SOFTWARE
PRODUCT (including but not limited to any images, photographs,
animations, video, audio, music, text, and applets incorporated into the
SOFTWARE PRODUCT), the accompanying printed materials, and any
copies of the SOFTWARE PRODUCT are owned by WATCHGUARD or its
licensors. Your rights to use the SOFTWARE PRODUCT are as specified in
this AGREEMENT, and WATCHGUARD retains all rights not expressly
granted to you in this AGREEMENT.  Nothing in this AGREEMENT
constitutes a waiver of our rights under U.S. copyright law or any other law
or treaty.

2.

Permitted Uses. You are granted the following rights to the

SOFTWARE PRODUCT:

(A)

You may install and use the SOFTWARE PRODUCT on any single

WATCHGUARD hardware product at any single location and may install
and use the SOFTWARE PRODUCT on multiple workstation computers.
(B)

To use the SOFTWARE PRODUCT on more than one WATCHGUARD

hardware product at once, you must purchase an additional  copy of the
SOFTWARE PRODUCT for each additional WATCHGUARD hardware
product on  which you want to use it.  To the extent that you install copies of
the SOFTWARE PRODUCT on additional WATCHGUARD hardware
products in accordance with the prior sentence without installing the
additional copies of the SOFTWARE PRODUCT included with such
WATCHGUARD hardware products, you agree that use of any software
provided with or included on the additional WATCHGUARD hardware
products that does not require installation will be subject to the terms and
conditions of this AGREEMENT.   You must also maintain a current
subscription to the WatchGuard LiveSecurity Service (or its equivalent) for
each additional WATCHGUARD hardware product on which you will use a
copy of an updated or modified version of the SOFTWARE PRODUCT
received through the WatchGuard LiveSecurity Service (or its equivalent).
(C)

In addition to the copies described in Section 2(A), you may make a

single copy of the SOFTWARE PRODUCT for backup or archival purposes
only.

3.

Prohibited Uses. You may not, without express written permission

from WATCHGUARD:

(A) Use, copy, modify, merge or transfer copies of the SOFTWARE
PRODUCT or printed materials except as provided in this AGREEMENT;

«
...
6
7
8
9
10
...
»

Summary of Contents for Firebox X10E



























































































































































































































































































































Reviews:

No comments

Related manuals for Firebox X10E

Brand: StarTech.com Pages: 2

ZyWALL SEM-DUAL

Brand: ZyXEL Communications Pages: 2

ZYWALL 35 - V4.03

Brand: ZyXEL Communications Pages: 142

Brand: Check Point Pages: 4

Brand: Siemens Pages: 62

Brand: SonicWALL Pages: 2

Brand: SonicWALL Pages: 2

Brand: SonicWALL Pages: 15

Brand: SonicWALL Pages: 26

Brand: SonicWALL Pages: 21

Brand: SonicWALL Pages: 42

Email Security 7.0 8000

Brand: SonicWALL Pages: 32

Brand: SonicWALL Pages: 44

Email Security 800

Brand: SonicWALL Pages: 40

Brand: SonicWALL Pages: 41

Brand: SonicWALL Pages: 65

Brand: SonicWALL Pages: 70

Brand: SonicWALL Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands