Managing Users and Groups
134
WatchGuard Firebox X Edge
more information on user licenses, see “About User Licenses” on
page 137.
On the Firebox Users page, you can see information about sessions
in the
Active Sessions
section. You can also see information on the
users that you configured for this Edge.
1
To connect to the System Status page, type
https://
in the
browser address bar, with the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1.
2
From the navigation bar, select
Firebox Users
.
The Firebox Users page appears.
Firebox Users Settings
Below
Firebox Users Settings
, you can see the current values for all
global user and session settings. To get access to the configuration
page for these settings, click the
Configure
button to open the Set-
tings page. For more information, see “Using Local Firebox Authen-
tication” on page 142 and “Configuring MUVPN client settings” on
page 140.
Active Sessions
If local user accounts are enabled, the
Active Sessions
section of the
Firebox Users page shows information for all current sessions,
including:
•
The name of the user who started the session
•
The total time since the session started
•
The time between the last packet and the session expiration is
known as the idle time. If the idle time is set to 0 hours and 0
minutes, the Firebox does not disconnect the session.
Summary of Contents for Firebox X15
