Managing Users and Groups
138
WatchGuard Firebox X Edge
session, and which options are available to customize authentica-
tion.
Three levels of Administrative Access are available for the Edge:
•
None
: Use this to connect to resources on the external network.
A user who uses this access level cannot see or change the Edge
configuration pages.
•
Read-Only:
Use this to see Edge configuration properties and
status. A user who uses this access level cannot change the
configuration file.
•
Full
: Use this to see and to change Edge configuration
properties. You can also activate options, disconnect active
sessions, restart the Edge, and add or edit user accounts. A user
who uses this access level can change the passphrase for all user
accounts.
Setting authentication options for all users
Some authentication options apply to all users. To set or change
authentication options:
1
To connect to the System Status page, type
https://
in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select
Firebox Users > Settings
.
The Settings page appears.
Summary of Contents for Firebox X15
