Enabling MUVPN for Edge Users
User Guide
195
8
Set MUVPN key expiration in kilobytes and/or hours. The
default values are 8192 KB and 24 hours.
To remove a size and/or time expiration, set the value to zero (0).
9
Select
Mobile User
from the
VPN Client Type
drop-down list if
the remote user is connecting from a desktop or laptop
computer instead of a handheld device such as a Pocket PC.
10
Select the
All traffic uses tunnel (0.0.0.0/0 IP Subnet)
check
box if the remote client will send all its traffic (including usual
Web traffic) through the VPN tunnel to the Firebox X Edge. This
can also let the MUVPN client connect with other networks that
the Firebox X Edge connects to.
If you do not select this check box, the remote user can connect
with the Edge’s trusted network only. You must enable this
check box for the remote user to be able to connect to:
- Networks on the other side of a Branch Office VPN tunnel that
the Edge has connected.
- Computers on the Edge’s optional network.
- Networks that are behind a static route on the trusted or
optional interface. For information on defining static routes,
see “Making Static Routes” on page 78.
11
Click
Submit
.
Summary of Contents for Firebox X15
