VISTA and VISTA WiFi
VISTA and VISTA WiFi
Note:
If a VISTA or VISTA WiFi is docked in a USB or WiFi Base while the upgrade
is being staged on the camera, the display does not show the staging process.
While the
upgrade is being staged
on a VISTA or VISTA WiFi in a Transfer Station, the
display:
l
Storage Used
meter fills with bars and
Storage Percentage
increases
l
8-character area scrolls
DOWNLOADING
When the
upgrade has finished staging
, the
Storage Used
meter is full, the
Storage
Percentage
shows
100%
, and the 8-character area scrolls
DOWNLOAD COMPLETE
for
about 5 seconds.
The
next time
you dock the camera in the USB Base, WiFi Base, or the Transfer Station, the
upgrade is applied. While the
upgrade is being applied
,
UPDATING DO NOT INTERRUPT
scrolls on the display.
Warning!
DO NOT REMOVE the camera from the dock while its new firmware is
being applied. Removing the camera from the dock during the upgrade can cause
the camera to stop functioning.
When the
upgrade has finished applying
, the camera sounds the camera ready alert
(depending on your alert notification selections).
VISTA XLT
Note:
If the VISTA XLT is docked in a USB or WiFi Base while the upgrade is being
staged on the camera, the display does not show the staging process.
While the
upgrade is being staged
on a VISTA XLT in a Transfer Station, the display:
l
First line reads
Upgrade
l
Second line shows the percentage of the upgrade already
downloaded next to a progress bar
l
Third line reads
DOWNLOADING
When the
upgrade has finished staging
on the camera, the
percentage downloaded and progress bar show
100%
, and the third line
reads
DOWNLOAD COMPLETE
for 5 seconds.
If VISTA XLT is undocked and not
recording, and has an upgrade staged on the camera, the
Upgrade Staged
icon (
) appears in the lower right corner of
the display.
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
41
