Using the VISTA Body Camera
VISTA WiFi and VISTA XLT: Associating with a recording
group
When you dock VISTA WiFi or VISTA XLT in a VISTA WiFi Base, the camera pairs with the WiFi
Base. This pairing allows the camera to associate with the local recording group that includes
the WiFi Base. The recording group can also include other VISTA WiFi or VISTA XLT cameras and
the local 4RE DVR. A recording group is typically linked to a vehicle.
Note:
You can pair more than one camera with the same WiFi Base.
When VISTA WiFi or VISTA XLT is associated with a recording group, it can participate in group
recordings. A group recording is multiple devices collaborating to start and stop their recorded
events together. When a group recording is uploaded, each device's event is linked to the other
group members' events.
To associate VISTA WiFi or VISTA XLT with a recording group:
n
Dock the camera in a VISTA WiFi Base that is connected to a local recording group.
The WiFi Base left LED blinks green multiple times when the camera and base have successfully
paired. When the camera is undocked, the display shows
Wi-Fi Signal Strength
bars (VISTA
WiFi) or a partially filled triangle (VISTA XLT) when the camera is paired with and in range of the
WiFi Base.
Once the camera is paired with the base, it is associated with the local recording group (and is
disassociated from any other recording group).
For more information on recording groups, see
Using VISTA WiFi or VISTA XLT with a Recording
.
44
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
