About the VISTA Body Camera
For more information about using VISTA Body Cameras with the Transfer Station, see
the VISTA Body Camera in a VISTA Transfer Station
.
Setting up the VISTA Transfer Station
For instructions how to set up the VISTA Transfer Station, see
VISTA WiFi Base
Note:
Not all VISTA Body Cameras or bases have the Wi-Fi® feature. For more
information, contact your WatchGuard representative.
When you dock the VISTA WiFi or VISTA XLT camera in the VISTA WiFi Base, the camera pairs
with the base. The camera can use the WiFi Base for:
l
Associating with a local recording group
The WiFi Base acts as the Wi-Fi access point
(802.11n hotspot) for VISTA WiFi or VISTA
XLT to connect to the local recording group
network. The broadcast range for the WiFi
Base depends on its current environment.
l
Updating firmware
l
Uploading recorded events from storage
(only with an Evidence Library 4 Web
connection)
l
Charging the camera's battery
You should only use the WiFi Base for
incidental charging during your shift.
Charging in a vehicle base can impact the vehicle battery and can slow down significantly in
warmer temperatures.
Important!
Battery charging shuts down at ambient temperatures greater
than 35 degrees C (95 degrees F).
66
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
