Specifications
Dimensions
300 x 220 x 65mm
Weight
1kg
Power Consumption
20mA @ 12VDC
Backup Battery
7.2V 500mA rechargeable
Siren Current
220mA @ 12VDC
Flash Current
180mA @ 12VDC
Timers
5sec. (Test) / 3min. / 20min.
Tamper Trigger
Interior/Exterior
Operating Environment
-25° to 70°C
Material
Polycarbonate
Case Protection
UV protection
This siren features LED light indicators for easy status confirmation that count from the
8-pin terminal connector, as follows:
• Power Cut:
LED 2 flashes twice, then pauses for 1 second. Siren will sound.
• Standby Mode:
Both LEDs flash alternately.
• No Backup Battery PSU:
LED 2 flashes.
• Siren Trigger:
Both LEDs and the Light flash continuously.
• INT Mode:
Tamper will trigger alarm directly.
• EXT Mode:
Tamper will trigger panel first.
• SAB Mode:
Control panel will power the buzzer.
• SCB Mode:
Backup battery will power the buzzer.
The factory default is INT (interior trigger)
The factory default is SAB.
LED Light Indicator
Tamper Switch
SAB/SCB Selection