Visit
www.watchguardsystems.com
7
3. SMS Command Reference
3.1 SMS Command Overview
SMS commands can be sent to the SIM card of the WGSMSC for remote configuration.
Note: Using the PC configuration software is always recommended, when possible.
•
All SMS commands must be fully CAPITALISED.
•
Examples and Return SMS Message are for reference only; these will vary according to your own configurator setup.
•
Password below is the default password (1234), replace this with the password you set
in 1.4.2 Basic Information Settings.
SMS Command
Return SMS Message
-
SMS Format Error, Please check Caps Lock in Command!
SMS Command
Return SMS Message
[CURRENT PAP+[NEW PASSWORD]
Example: 1234P4321
4321, This is the New Password, please remember it carefully.
SMS Command
Return SMS Message
[PAEE
Example: 1234EE
Model: WGSMSC
Version: V 1.00 2018-04
IMEI: 867965029050313
GSM Signal Value: 30
Action
SMS Command
Return SMS Message
Set mobile phone numbers
[PAA+[SERIAL#]+T+[PHONE#]
Example: 1234A3T13570810254
Tel1: ---
Tel2: ---
Tel3: 13570810254
Tel4: ---
Tel5: ---
List all numbers
[PAA
Example: 1234A
Tel1: [PHONE#]
Tel2: [PHONE#]
Tel3: [PHONE#]
Tel4: [PHONE#]
Tel5: [PHONE#]
Delete existing number
[PAA+[SERIAL#]
Example: 1234A3
Tel1: [PHONE#]
Tel2: [PHONE#]
Tel3: ---
Tel4: [PHONE#]
Tel5: [PHONE#]
3.1.1 SMS Command Error
This error shows up when an invalid SMS format is sent. Double-check your password and command and try again.
3.1.2 Change Password
This code changes the communicator’s SMS password.
3.1.3 Device Information
Refer to communicator specifications, current version, etc.
3.1.4 SMS Notification Numbers
Program the 5 mobile numbers for SMS notification