background image

•   Install the device in a secure location, preferably in a locked equipment rack or secure 

server room.

•   Connect the power cord to the power socket on the back panel of the device.

•   To access the Web UI Setup Wizard, connect to the WatchGuard XCS using one of these 

methods:

     o  

Connect your computer to the same network as the WatchGuard XCS through a 

network switch. Connect the WatchGuard XCS to the network switch using the 

first onboard Ethernet connector (NIC 1) at the left side of the back panel.

     o  

Connect your computer directly to the WatchGuard XCS using a cross-over 

Ethernet cable connected to the first onboard Ethernet connector (NIC 1) at the 

left side of the back panel.

•   The default IP address on the WatchGuard XCS is 10.0.0.1/24.

•   Configure your computer to use the IP address 10.0.0.2 with a netmask of 

255.255.255.0 to connect to the WatchGuard XCS.

•   Power on your device. Wait at least five minutes for the system to initialize before you 

try to connect to the WatchGuard XCS with a web browser. 

NOTE: Ping is enabled on the configured network interface. You can ping the default address 10.0.0.1 to 

check connectivity before you connect with a web browser.

•   Open a web browser and type 

https://10.0.0.1

 to start the Web UI Setup Wizard. 

NOTE: Because the XCS device uses a self-signed certificate, you may see a certificate warning in your 

browser. It is safe to ignore the warning (Internet Explorer) or to add a certificate exception (Mozilla Firefox).

•   On the Login page, type the default user ID (

admin

) and the default password (

admin

).

•   Follow the instructions on the screen and complete the Wizard. 

NOTE: Make sure you enter your feature key during the Wizard.

•   Log in to the WatchGuard XCS Web UI with the user name 

admin

 and the new 

password you set in the Wizard.

Connect your WatchGuard® XCS

3

NIC 1

Ethernet cable

Switch

Ethernet 
cable

Connection and Installation

Next Steps

Congratulations! 

You have finished the basic setup of your WatchGuard® XCS. You can 

use the Web UI to continue all configuration and management tasks. 

WatchGuard XCS Configuration

•   The XCS is initially configured for a deployment using a single interface on an internal 

network. To configure additional network interfaces, select 

Configuration > Network > 

Interfaces

.

•   A weekly full email report is scheduled to be emailed to the administrator each 

Saturday. To configure additional reports, select 

Activity > Reports > Schedule

.

Software Updates

•   The Security Connection feature contacts WatchGuard’s support servers daily to check 

for new software updates. 

•   To install new software updates for your device, select 

Administration > Software 

Updates > Updates

.

Additional Resources

For more information about how to configure your WatchGuard XCS:

•   From the Web UI, select 

Support > Online Manual

.

•   Go to 

http://www.watchguard.com/help/documentation

 and download the latest 

WatchGuard XCS documentation.

•   Go to 

http://www.watchguard.com/training/courses.asp

 for training presentations and 

additional training resources.

•   Go to 

http://www.watchguard.com/forum

 to view an interactive online user forum for 

the WatchGuard XCS moderated by senior WatchGuard support engineers. 

•   Go to 

http://customers.watchguard.com

 to view and search the knowledge base for 

information on specific WatchGuard XCS product issues.

•   For copyright information, please see the Copyright Guide located on the WatchGuard 

XCS documentation page at 

http://www.watchguard.com/help/documentation/xcs.asp

Summary of Contents for XCS 580




















Reviews: