4
WatchGuard XTM 5 Series
Hardware Specifications
Front View
The front of the device.
This is a close-up of the right side of the front of the device.
LCD indicator panel
Device status information appears on the LCD screen. Press the buttons below the screen to change
the information that appears on the screen.
For more information, see “Use the LCD Interface” on page 8.
LCD console buttons
Press the LCD console buttons to see status information and start recovery procedures.
To boot the device in safe mode, press and hold the down arrow button when you power on the
device.
For detailed information about the LCD indicator panel and the LCD console buttons, see “Use the
LCD Interface” on page 8.
Power (
)
When the device is powered on, the power indicator is green.
Arm/Disarm
When the device is armed, this indicator is green. When the device is disarmed, this indicator is red.
Storage (
)
When there is activity on the compact flash, this indicator is yellow.
All interfaces are on the front of the device.
Serial port (Console)
An RJ45 connector for the serial interface.
