81
3) Operation
Before you use Quick DDNS, you need to enable this service and set proper server address, port
value and domain name.
Server address
：
www.quickddns.com
Port number
：
80
Domain name
：
There are two modes: Default domain name and customized domain name.
Except default domain name registration, you can also use customized domain name (You can
input your self-defined domain name.) After successful registration, you can use domain name
to login installed of the device IP.
User name: It is optional. You can input your commonly used email address.
Important
Do not register frequently. The interval between two registrations shall be more than 60
seconds. Too many registration requests may result in server attack.
System may take back the domain name that is idle for one year. You can get a notification
email before the cancel operation if your email address setup is OK.
NTP
The NTP interface is shown as in Figure 5-29.
Here you can realize network time synchronization. Please enable current function and then
input server IP, port number, time zone and time.
Figure 5-29 NTP
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Enable NTP function or not.
Server IP
Server IP address
Port
Server port. System supports TCP only and default port
value is 123.
