5
5
5
5
How to set the Motion Areas
(1)POSITION Setting
The position of the effective motion area can be set.
Use UP&RIGHT/DOWN&LEFT key to set the horizontal
position of one of the 4 detection areas. After that,
press ENTER key to set the vertical position, which
can be set in the same way as setting the
horizontal position. After the setting, press
ENTER key to proceed to the SIZE setting.
*HINT: When positioning the window, align the top left corner of
to the desired window position's top left corner, as the SIZE
Setting references this corner.
(2)SIZE Setting
The size of the effective detection area can be adjusted.
Use UP&RIGHT/DOWN&LEFT key to adjust the
horizontal size. After the adjustment, press ENTER key.
Use the same key to adjust the vertical size. When
finishing the size adjustment, press ENTER key.
(3))RET/AGAIN Setting
Use UP&RIGHT/DOWN&LEFT key to select RET/AGAIN.
MOTION
(Sub Menu)
Details
OFF
-
Motion detection is OFF.
ON
AREA SELECT
The present detection area can be selected. Select the area from Area1
to Area4.Use LEFT/RIGHT key to select the area.
AREA DISPLAY
The area presently selected can be shown with ON, or not shown with OFF.
Use LEFT/RIGHT key to select ON/OFF. Pressing ENTER key on ON, will proceed
to Motion Detection area window position and size setting
5
5
5
5
.
SENSITIVITY
Detection sensitivity can be adjusted. It ranges from 0 to 40.
Use LEFT/RIGHT key to set the sensitivity.
When pressing ENTER key on RET,
returning to FUNCTIONS Menu.
MOTION VIEW
MOTION VIEW can be set.
Use LEFT/RIGHT key to set ON/OFF.
ENTER key
RETURN
When pressing ENTER key on AGAIN,
returning to POSITION Setting.
return to FUNCTIONS Settings. Pressing ENTER key on END, OSD menu
turns off and SETUP is finished.
ENTER key
Use LEFT/RIGHT key to show RET/END. Pressing ENTER key on RET,
21