background image

User guide

 886E - WIFI Version

2

  

Water-Protec products have been manufactured under the highest standards of quality of the 

industry. That’s why Water-Protec offers a 5 year warranty on the valve, a 2 year warranty on 

parts and a 1 year warranty on the installation if performed by one of our Certified Network member 

starting on the original date of purchase. 

If a part is proven to be defective during the warranty period, Water-Protec will provide, free of charge, the 

parts necessary to restore the system to working order. A proof of purchase (sales invoice) must  

accompany any warranty claim. Defects or damage caused by the use of parts other than original  

Water-Protec parts are not covered by this warranty. 

Please note that the warranty does not include damage caused by improper installation or improper use of 

the product. In this case, labour or replacement of parts will be at the owner’s expense.

For a claim request, please first contact our technical service at the number at the bottom of the page. 

They will then guide you through the process of sending the defective part with a Return Merchandise 

Authorization (RMA) number.

Technical support 24/7

 

1 833 487-7997 

Water-Protec T.P. Products : 

1 Avenue Liberté, Candiac (Québec) J5R 1X8

 Content

 Warranty

1.  Valve : 

A smart valve is installed at the main water 

inlet and will automatically shut off water supply if 

sensors detect a leak. 

2.  Control Panel : 

The control panel interacts with 

sensors for water leak detection and battery strength. 

It also monitors ambient temperature and proper 

valve connection. For troubleshooting, please refer to 

graphic (p. 9). You can connect 2 electronic valves and 

up to 40 sensors. It is equipped with a 9 volt battery to 

operate the system in situation of power failure.

3.  Remote control : 

The remote control allows 

you to control the intelligent valve from a distance 

during  extended absences.

4.  Power supply  : 

A 12V power supply adapter in direct current.

5.  Sensors : 

The kit includes 5 sensors which can be installed in strategic 

locations  throughout your house, such as at water heater, dishwasher, washing 

machine, toilets, etc. 

Certified  

according to 

CSA

 

(125.3)

 

standards

Summary of Contents for LED 13


















Reviews: