Water Right ASP-TW, Installation Instructions & Owner'S Manual

10

 OPERATING DISPLAYS AND MAINTENANCE:

5 . ERROR MESSAGE:

 If the word “ERROR” appears and flashes alternately with the dealer name and phone 

number, record the ERROR number and contact your servicing dealer promptly. This indicates that the control 

valve was not able to function properly.

6 .  BRINE TANK MAINTENANCE AND SALT:

 Refill the brine tank as necessary, making sure at least 1/3 of the 

brine tank is full at all times. Without proper salt levels, the water softener may not operate properly.

Because “typical” settings of this water softener include a dry salt storage feature (a small amount of water in brine tank between regeneration), 

the manufacturer recommends the use of solar salt for best results. The brine tank is manufactured for the use of solar, pellets or rock salt. 

Do not 

use block salt.

 If pellet or rock salt is 

used, a cleaning of the brine tank every six months is recommended. If the dry salt storage feature is not being 

utilized, block salt may be used.

CAUTION:  With some models the manufacturer does NOT recommend the use of any resin cleaners, nor placing any resin cleaners 

into the brine tank. Furthermore, do not use any salt that indicates it is an iron cleaning salt or that contains any cleaning 

additives. This may be harmful to the water softener and for human consumption. Consult dealer for proper cleaning 

instructions.

7 .  CHECK SALT INDICATOR AND AUDIBLE ALARM (ONLY AVAILABLE ON SOME MODELS):  

This control valve is equipped with a low salt warning to alert homeowners that the system is operating in a low 

salt condition. This usually indicated that the salt level in the brine tank is too low to operate properly. If “CHECK 

SALT” appears on the screen, there will usually be an audible alarm that sounds also (if turned on), alerting you 

to these conditions. 

TO TURN OFF ALARM: 

If the audible alarm sounds due to a low salt condition, press any button on the 

face of the control valve to turn off. If the salt is not added to the brine tank before 

the next regeneration, the CHECK SALT indicator will alarm again. This will repeat until 

the problem is corrected.

SALT ALARM SCREEN

CHECK

SALT

ERROR SCREEN

ERROR 

106

CALL FOR SERVICE