Water Right Sanitizer Plus, Master Programming Manual

8

cont’d 

RELAY 1 TRIGGER

SET

OFF

RELAY 1 TRIGGER

SET

TIME

RELAY 1 SETPOINT

SET

15

MIN

RELAY 1 DURATION

SET

90:00

MIN

RELAY 1 TRIGGER

SET

GALLONS

RELAY 1 SETPOINT

SET

25

GAL

RELAY 1 DURATION

SET

0:30

MIN

5

Configuration Screens  

Accessed by pressing and holding 

NEXT

 and 

–

 simultaneously for three seconds. 

Once screen changes, press and hold 

NEXT

 and 

–

simultaneously again for three seconds.

Set first relay trigger with + button. Press + to reach desired triggering event.

If not using a relay, make sure OFF is selected and press 

NEXT

.

OFF indicates that no external devices are being used. 

Default is OFF.

return to  

general display

return to  

general display

return to  

general 

display

Set relay trigger with + or — buttons

TIME indicates that relay will be energized for a specified period 

of time during regen only. To set by this, press 

NEXT

.

Set relay setpoint with + or — buttons

This is the delay time period after regen starts that relay 

will initially energize. 0 indicates an immediate start.

Set relay setpoint with + or — buttons

This is the gallons that will be expended before relay will 

initially energize.

Set relay trigger with + or — buttons

GALLONS indicates that relay will be energized after a specified number of 

gallons are expended in service position only. To set by this, press 

NEXT

.

Set relay duration with + or — buttons

This is the duration of time, after relay setpoint, that relay 

will remain energized. 

NOTE: Can be all or any part of total regen time, but will 

turn off at end of regen.

Set relay duration with + or — buttons

This is the duration of time, after relay setpoint, 

that relay will remain energized. Adjustable from 

1 sec to 500 min. 

NOTE: Will shut off if a regen is initiated

continued from 

previous page

continue to next page

If using Relay:

1. Press + to engage    

    one of the following   

    Relay Triggers:

       • Time

       • Gallons

       • Regen

       • Error

       • Flow
       • Pulse
2. Press 

NEXT

 to  

    program Setpoints   

    and Durations