WaterSource
®
Cellular Functional Water
®
20
21
Directions for Product Use
Directions for Product Use
irections for Product Use
D
When using the Touch screen
1
When using fixed quantity discharge function
When using fixed quantity discharge function
When using the Jog dial
2
Select a desired water mode.
①
Water Outflow Stop:
Lightly touch the blinking icon again to stop water flow.
③
②
Water Outflow:
The selected icon flickers during water outflow. If the selected
icon is not pressed again, the unit will automatically stop after 15 minutes of
water outflow.
※
NOTE: Remember, a LIGHT TOUCH is all that is required when pressing the LCD.
Touch the QTY,C icon and choose a fixed amount of water.
(0.5
ℓ
, 1.0
ℓ
,1.5
ℓ
)
( 0.5
》
1.0
》
1.5
》
release )
Select a desired water mode.
Water outflow stops automatically.
(Fixed quantity discharge function is released after water collection.)
①
②
③
Touch the "QTY,C" button.
Select the fixed amount of water you need by turning the jog dial.
- Clockwise : Increasing by 100ml ( Max.5L )
- Counterclockwise : Decreasing by 100ml ( Min. 200ml )
Push the discharge level you need.
Automatic stop after discharging fixed amount of water you selected.
(Discharge of water will stop when you touch the button while water is coming out.)
After water collection, fixed quantity discharge function is released.
①
②
③
④
⑤
Turn Dial either direction to select function.
Push center of Dial to start water outflow. The selected icon flickers
during water outflow.
Push center of Dial to stop water outflow.
①
②
③
》
》
》
