The voice icon will disappear by selecting the voice icon
in this sequence.
Voice message - On : “ Voice function works ”
Off : “ Voice function terminates ”
①
②
4
Volume Level Adjustment
5
Selecting Voice On / Off
①
Change to the system setting mode by pressing the
SE T icon on the LCD for 3 seconds.
(beeps 2 times. Voice says ,“System setup mode”)
④
Press setup icon for 3 seconds to return to standby screen.
(beeps 2 times. Voice says ,“Setup was completed”)
Control the voice volume by F1 and F2 button on the bottom.
Current voice volume level is displayed on LCD.
- F1 icon : Volume decrease - F2 icon : Volume increase
②
Press the voice icon to control volume.
③
④
WaterSource
®
Cellular Functional Water
®
24
25
Customer Serviceable Parts
Cleaning Function
leaning Function
C
Performed during water outflow after more than 24 hours of non-operation.
Performed after 30 liters of water outflow.
Performed each time power is turned on.
(
Note:
RTR icon and backlight will flicker before automatic cleaning is performed)
①
②
③
1
Auto Cleaning Function
(15 Sec)
Press the RTR button on stand-by screen.
The cleaning (Voice message: “It’s under washing, do not drink”)
- Automatic stop: The cleaning will be stop automatically when the washing
time is done.
- Manual stop: The cleaning will be stop when touching the screen during
washing
The screen changes to the standby screen once the cleaning is done.
①
②
③
2
Manual Cleaning Function
(15 Sec)
Primary Filter:
YT20 1st Filter
The life of the filter can vary greatly due to use, water pressure, water quality and the
change of seasons. Filters may need to be replaced sooner than the scheduled time due to
these reasons, as you may notice reduced water quality or declining water taste.
ustomer Serviceable Parts
C
SecondaryFilter:
YT20 2nd Filter
