Setting Time of Day
1.
Press and hold
EITHER
the Up or Down button until the programming icon replaces the service icon and
the parameter display reads
TD.
2.
Adjust the displayed time with the Up and Down buttons.
3.
When the desired time is set press the Extra Cycle button to resume normal operation. The unit will also
return to home screen after 5 seconds if no buttons are pressed.
User Programming Mode Steps
1.
Press and Hold the Up and Down buttons for 5 seconds while in service mode.
The time of day is NOT set to 12:01 PM.
2.
Use this display to adjust the Day Override. This option setting is identified by “DO” in the upper left hand
corner of the screen. (Recommend days – no less than 7 and no more than 30).
3.
Press the Extra Cycle Button to return to the home screen.
Press the Extra Cycle button. Use this display to adjust the Regeneration Time.
This option setting is identified by “RT” in the upper left-hand corner of the screen.
***NOTE: A FLASHING TIME OF DAY DISPLAY INDICATES A RECENT LOSS OF POWER. PUSH ANY BUTTON TO CLEAR!
Questions ? Please contact Water, Inc. Service Department 1-800-322-9283
F:HousePure Quick/StartHP02 Quick Start Guide 11-02-2-22
Note:
Change 1 to 14